Here's why this setup is dangerous:
* Missing Neutral Wire: The absence of a white wire indicates a missing neutral wire. This is a major safety hazard, as the neutral wire is essential for completing the electrical circuit and preventing electrical shock.
* Incorrect Wiring: The 2-6 wire setup typically means you have a 220-volt line, which is fine for an electric range. However, without a neutral wire, you'll need to rewire the circuit to meet modern electrical code.
Here's what you should do:
1. Contact a Licensed Electrician: Explain the situation to them. They will inspect the existing wiring, determine the cause of the missing neutral, and advise on the proper course of action.
2. Do NOT Attempt DIY Repairs: Trying to fix this yourself could lead to electrical shock, fire, or damage to your home.
3. Modern Electrical Code: The electrician will likely need to install a new neutral wire, which may involve running a new wire through the walls or ceiling.
Important Safety Tips:
* Never work on electrical wiring if you're not qualified. Always consult a licensed electrician.
* Turn off the power to the circuit before working on it.
* Never work on electrical wiring if you're wet or standing on a damp surface.
Remember, electrical work is dangerous. It's always best to leave it to the professionals.
