A check valve is a device that is installed in the pipes connected to a water heater to prevent the backflow of water. When the water flows forward toward the check valve, the valve opens to allow the water to flow through. When the flow of water stops, the check valve closes so that the water cannot reverse direction and flow back the way it came.
Check valves are important in a water heater because they prevent flooding or overflowing. They also stop the water from constantly flowing backwards, even when the heater is off. This prevents eroding of the pipes and saves power.
There are several types of check valves, but most water heaters use a swing check valve. A swing check valve contains a disc attached to the wall of the pipe by a hinge. When the water flows forward through the valve, the disc swings open on its hinges, allowing the water through. When the flow of water stops, the disc slams shut, preventing any backflow. In some cases, the swing check valve is weighted so that it will operate most effectively.
