Fundamental Quantities:
* Current (I): The rate of flow of electrical charge. Measured in Amperes (A).
* Voltage (V): The electrical potential difference between two points. Measured in Volts (V).
* Resistance (R): The opposition to the flow of current. Measured in Ohms (Ω).
Derived Quantities:
* Power (P): The rate at which electrical energy is transferred. Measured in Watts (W).
* Formula: P = V * I
* Energy (E): The total amount of electrical energy transferred. Measured in Joules (J).
* Formula: E = P * t (where t is time)
* Capacitance (C): The ability of a device (like a capacitor) to store electrical charge. Measured in Farads (F).
* Inductance (L): The tendency of a coil to oppose changes in current. Measured in Henrys (H).
* Frequency (f): The number of cycles of an alternating current (AC) per second. Measured in Hertz (Hz).
Other Important Measures:
* Charge (Q): The amount of electrical energy carried by a particle. Measured in Coulombs (C).
* Impedance (Z): The total opposition to the flow of current in an AC circuit, considering both resistance and reactance (opposition due to capacitance and inductance). Measured in Ohms (Ω).
Key Relationships:
* Ohm's Law: V = I * R (Voltage is directly proportional to current and resistance).
* Power Law: P = V * I (Power is equal to the product of voltage and current).
Understanding the Measures:
* Current: Imagine water flowing through a pipe. Current is like the volume of water flowing per unit time. Higher current means more electrical charge is flowing.
* Voltage: Think of voltage like the pressure pushing the water through the pipe. Higher voltage means a stronger force pushing the electrical charges.
* Resistance: Imagine the pipe being narrower or having obstacles. Resistance is like these obstacles, making it harder for the water (electrical charge) to flow.
Let me know if you'd like a more detailed explanation of any of these measures or how they relate to each other.