Here's why:
* Pure water boils at 100°C (212°F).
* Antifreeze (typically ethylene glycol) has a higher boiling point than water.
* When you mix antifreeze and water, the boiling point of the mixture is higher than that of pure water.
However, there's no single boiling point for an antifreeze-water mixture. The higher the concentration of antifreeze, the higher the boiling point will be.
Here's a general idea:
* 50/50 mixture (by volume): The boiling point will be around 106°C (223°F).
* Higher concentrations of antifreeze: The boiling point will be even higher.
Important Note:
* It's crucial to use the correct antifreeze-water mixture recommended by the vehicle manufacturer. Using too much antifreeze can lead to engine damage, while using too little might not provide adequate protection against freezing or boiling.
To find the specific boiling point of your antifreeze-water mixture, you can:
* Consult your vehicle owner's manual: It usually provides the recommended mixture and the corresponding boiling point.
* Use an antifreeze tester: These devices measure the concentration of antifreeze in your coolant and provide the corresponding boiling point.
